loading

RS-232 & USB Combo Control Boards

Three of PenMount’s newest innovations, the PM6500A and PM6202B are the ultimate combo boards.  These control boards collectively integrate the features and functions of auto detecting USB and RS232 serial interfaces and support 4, 5 & 8 wire resistive touch screens. They are complemented by superbly developed automatically installing PenMount drivers.

The PM6500A and PM6202B control board utilizes the PenMount 6000 series controller and have been designed for those who desire an all-in-one solution.  The boards have a 10-bit A/D converter built-in, making the total printed circuit board denser and their circuit diagrams are also designed for optional 12-bit ADC. There are two connectors on this board, one connector for a 4, 5, 8-wire touch screen cable (optional) and another for a 4-pin USB A type cable (optional).


PM6202B Control Board

Download PM6202B Datasheet

PM6202B CZ4 Control Board

PM6202B_CZ4
PM6202B_CZ4_2

PM6202B CW4 Control Board

PM6202B_CW4
PM6202B_CW4_2

PM6202B CW5 Control Board

PM6202B_CW5
PM6202B_CW5_2
Touch ScreenFor 4- or 5-wire analog resistive touch screens
InterfaceUSBFull speed 12MHz bps
RS2329600 baud ratenon-PnP mode
Touch Screen ControllerPenMount 6000 controller IC
Resolution2048×2048
Dimension holes(L)70.0mm x (W)20.0mm x (H)10.3mm (max), two 3.0 φ screw
ConnectorZIF connector or Wafer connector on board for touch screen
DiagnosticLED on board
Cursor accuracy< 1%  (Active Area Diagonal of touch screen with PenMount Advanced calibration utility support)
Resistance range30 ~ 1.3K ohm
Operating Voltage+5V DC
Power ConsumptionStandby Mode : 13.8 mA ; Active Mode : 21.8 mA( VCC=+5V, Top sheet Panel Resistance: 365 ohm ; Bottom sheet Panel Resistance: 660 ohm )Note: Actual current will vary according to touch panel resistance.
Electro Static Discharge(ESD)Air Discharge 15KV , Contact Discharge 8KV
Storage Temperature-40 ℃ ~ 85 ℃
Operating Temperature-20 ℃ ~ 70 ℃

PM6202B Driver Software

  • RS232 interface:DOS, Windows 2000/ XP/ XPE/ 2003/ 2008/ Vista/ 7 /8, Windows CE 5.0/ 6.0(for X86, Armv4, Armv4i platform), Windows Embedded Compact 7/ 2013(for X86, Armv7, MIPSII platform), Linux (Kernel 3.x and X-Window mode), QNX 6.2/ 6.3.2/ 6.4.1/ 6.5
  • USB interface:Windows 2000/ XP/ XPE/ 2003/ 2008/ Vista/ 7 /8, Windows CE 5.0/ 6.0(for X86, Armv4, Armv4i platform), Windows Embedded Compact 7/ 2013(for X86, Armv7, MIPSII platform), Linux OS (Kernel 3.x and X-Window mode), QNX 6.4.1/ 6.5 (Inbox support)

PM6500A Control Board

Download PM6500A Datasheet

PM6500A

Touch ScreenFor 4, 8-wire or 5-wire analog resistive type
InterfaceUSBFull speed 12Mbps
RS23219200 baud rate, N81PnP mode
Touch Screen ControllerPenMount 6000 controller IC
Resolution2048×2048
Size60×26 mm, two 3φ screw holes
Cursor accuracy< 1%  (Active Area Diagonal of touch screen with PenMount Advanced calibration utility support)
Resistance Range50~1.3K ohm
DiagnosticLED
Operating Voltage+5V DC
Electro Static Discharge (ESD)Air Discharge 15KV ,
Contact Discharge 8KV
Storage Temperature-40 ℃~ 85 ℃
Operating Temperature-20℃ ~ 70 ℃
Power ConsumptionStandby Mode : 14.4 mA ; Active Mode : 22.5 mA(VCC=+5V, Top sheet Panel Resistance: 365 ohm; Bottom sheet Panel Resistance: 660 ohm) Note: Actual current will vary according to touch panel resistance.

PM6500A Driver Software

  • RS232 interface:DOS, Windows 2000/ XP/ XPE/ 2003/ 2008/ Vista/ 7 /8, Windows CE 5.0/ 6.0(for X86, Armv4, Armv4i platform), Windows Embedded Compact 7/ 2013(for X86, Armv7, MIPSII platform), Linux (Kernel 3.x and X-Window mode), QNX 6.2/ 6.3.2/ 6.4.1/ 6.5
  • USB interface:Windows 2000/ XP/ XPE/ 2003/ 2008/ Vista/ 7 /8, Windows CE 5.0/ 6.0(for X86, Armv4, Armv4i platform), Windows Embedded Compact 7/ 2013(for X86, Armv7, MIPSII platform), Linux OS (Kernel 3.x and X-Window mode), QNX 6.4.1/ 6.5 (Inbox support)

Related Resources