loading

USB Control Boards

PenMount offers 1 type of USB interface control board.

  • PM6300A : supports 4, 8-wire or 5-wire touch screens

All control boards bundled with drivers.


PM6300A Control Board

Download PM6300A Datasheet

PM6300A

Touch ScreenFor 4, 8-wire or 5-wire analog resistive type
CommunicationsUSB Full-speed, 12Mbps
Touch Screen ControllerPenMount 6000 controller IC
Resolution2048×2048
Size60×26 mm, two 3φ screw holes
Cursor accuracy< 1%  (Active Area Diagonal of touch screen with PenMount Advanced calibration utility support)
Resistance Range50~1.3K ohm
DiagnosticLED on board
Operating Voltage+5V DC
Electro Static Discharge (ESD)Air Discharge 15KV ,
Contact Discharge 8KV
Storage Temperature-40 ℃~ 85 ℃
Operating Temperature-20℃ ~ 70 ℃
Power ConsumptionStandby Mode : 13.4 mA ; Active Mode : 21.5 mA(VCC=+5V, Top sheet Panel Resistance: 365 ohm ; Bottom sheet Panel Resistance: 660 ohm)
Note: Actual current will vary according to touch panel resistance.

PM6300A Driver Software

Windows 2000/ XP/ XPE/ 2003/ 2008/ Vista/ 7 /8, Windows CE 5.0/ 6.0(for X86, Armv4, Armv4i platform), Windows Embedded Compact 7/ 2013(for X86, Armv7, MIPSII platform), Linux OS (Kernel 3.x and X-Window mode), QNX 6.4.1/ 6.5 (Inbox support)


Related Resources