loading

電阻式控制 IC

電阻式PenMount IC 提供給客戶自行設計到系統主機上,其種類有RS-232 和 USB 二種介面。

  • PenMount 6000: RS232 & USB 介面
  • PenMount 9000: RS232 介面

所有的控制 IC 都包含驅動程式,並支援4, 5, 8線電阻式觸控面板。

PenMount 6000 觸控式螢幕控制晶片組 (RoHS Compliance)

PenMount 6000 是一款擁有高效能的觸控控制器,內含隨插即用的功能符合最新作業系統的趨勢。是採用 USB 及 RS-232 界面的高性能觸控式螢幕控制晶。PenMount 6000 內含 10-bit A/D 轉換器,適合高密度電路設計。

PenMount 6000 Hardware Data

Touch Screen:4, 5 , 8-wire
Package:28-pin QFN
Communications:RS-232 19200 / 9600 baud rateUSB Full-speed, 12Mbps
Feature:
  • High-speed pipelined 8051-compatible microcontroller core (up to 25MIPS)
  • True 10-bit ADC with analog multiplexer
  • On-chip Voltage Reference and Temperature Sensor
  • On-chip Voltage Comparators
  • 12 MHz internal oscillator
  • On-chip FLASH memory
  • USB, UART interfaces implemented in hardware
Sample Rate160 points per second (minimal)
Resolution1024×1024
Resistance Range :50~1.3K ohm
Operating Voltage:+3.3V ~ +5V DC ± 5%
Operating Temperature:-40 ℃ to +85 ℃
Storage Temperature:-65 ℃ to +150 ℃
Power ConsumptionStandby Mode : 13.4 mA ; Active Mode : 24.6 mA
(VCC=+5V, Top sheet Panel Resistance: 274Ω;
Bottom sheet Panel Resistance: 770Ω)

 PM6000 Controller Driver Software

  • RS232 interfaceDOS, Windows 2000/ XP/ XPE/ 2003/ 2008/ Vista/ 7 / 8/ 10, Windows CE 5.0/ 6.0(for X86, Armv4, Armv4i platform), Windows Embedded Compact 7/ 2013(for X86, Armv7, MIPSII platform), Linux (Kernel 3.x and X-Window mode), QNX 6.2/ 6.3.2/ 6.4.1/ 6.5
  • USB interfaceWindows 2000/ XP/ XPE/ 2003/ 2008/ Vista/ 7 / 8/ 10, Windows CE 5.0/ 6.0(for X86, Armv4, Armv4i platform), Windows Embedded Compact 7/ 2013(for X86, Armv7, MIPSII platform), Linux OS (Kernel 3.x and X-Window mode), QNX 6.4.1/ 6.5 (Inbox support)

PenMount 9000 觸控螢幕控制器晶片組 (RoHS Compliance)

PenMount 9000 是採用 RS-232 界面的高性能觸控式螢幕控制晶片組,內含 A/D轉換器符合需要自製電路板的需求。除此之外這些個別控制單元,適合大型觸控式面板的區域補償。PenMount 9000 支援 4 線、8 線、5 線觸控式面板使用。

PenMount 9000 Hardware Data

Touch Screen:4, 5 & 8 wire
Package:32-pin TQFP
Communications:RS-232 interface
Nature:8-bit RISC microprocessor with built-in
functions including 10-bit ADC, UART, Timer, Counter, Comparator, Watchdog, Memory, etc.
Operating Voltage:DC +5V
Power Consumption:
(at 4 MHz, 3V)
Standby Mode : 16 mA ; Active Mode : 27.5 mA
( VCC=+5V, Top sheet Panel Resistance: 365 ohm ; Bottom sheet Panel Resistance: 660 ohm )
Note. Actual current will be different by touch panel’s resistance.
Operating Temperature:-40 ℃ to +85 ℃
Storage Temperature:-65 ℃ to +150 ℃

Please refet to the data sheet describing ATmega8L-8AU from ATMEL for more detail.

PM9000 Controller Driver Software

  • DOS, Windows 3.1/ NT4.0/
  • Windows 98/ Me/
  • Windows 2000/ XP/ 2003/ 2008/ Vista/ 7/ 8/ 10
  • Linux (up to kernel 3.x), QNX 6.2/ 6.3.2/ 6.4.1/ 6.5
  • Windows CE 5.0/ 6.0(for X86, Armv4, Armv4i platform), Windows Embedded Compact 7/ 2013(for X86, Armv7, MIPSII platform);
  • Solaris 10/11


Related Resources