About Windows - FAQs | Manufacturer of Resistive | PCAP Touch Screen | PenMount Touch Screen Controller - AMT

Please see below the set of FAQs about PenMount resistive touch screen controllers used in Windows systems. If you cannot find the answer you want below, please mail to us. Certified resistive, projected capacitive (PCAP) touch screens and PenMount touch screen controllers meeting international standards, ISO, UL E331240-A1-UL, REACH, and RoHS. All touch screen products are supplied with flexible production quantity and long term support.

amt1@amtouch.com.tw

Contact Us

About Windows

AMT provides touch screen solutions, touch screen displays, optical bonding and Open Frame products for industrial, medical and transportation markets, creating a convenient one-stop service.

About Windows

Please see below the set of FAQs about PenMount resistive touch screen controllers used in Windows systems. If you cannot find the answer you want below, please mail to us.

In Windows Server 2008, the PenMount device operates as a touch digitizer by default. However, touch digitizers can only operate when an extra feature called the "Desktop Experience" is installed. The "Desktop...

Read more

1. You may use editions prior to and including PenMount Windows Universal Driver V2.2.0.263 for installation. 2. If you use PenMount Windows Universal Driver V2.2.0.283, please modify the install.ini as follows...

Read more

Please download devcon.exe from Microsoft, then please refer to the following instructions: PM9000 RS-232: ● Devcon.exe disable SERENUMDCO9000 (To disable the touch screen) ● Devcon.exe enable...

Read more

The PenMount Windows Universal Driver V2.1.0.234 or later versions support Non-PnP RS-232 PenMount controllers. V2.1.0.234 will automatically change every COM port settings to allow detection of PenMount...

Read more

1. Windows 7 supports multi-touch input devices, and provides API for two finger gestures. Windows Vista only supports single touch input devices. 2. On both Windows Vista and Windows 7, user will be able...

Read more

Gesture is a common word for finger or hand motion. Flicks are gestures that are used in Microsoft Vista. According to Windows SDK documents from Microsoft, "A flick is a unidirectional pen gesture that...

Read more

If you wish to install PenMount Universal Driver V2.0.0.113, please follow the steps below: 1. Download the appropriate PenMount Windows Universal Driver matching your operating system. 2. Uninstall the old PenMount...

Read more

1. Uninstall the driver, making sure that the PenMount control board is connected to the computer, then restart Windows. 2. Make sure that the driver matches the PenMount control board and operating system...

Read more

This can be caused by a incomplete installation of the PenMount Windows Universal Driver. Please re-installing the driver.

Read more

Yes. The PenMount Windows Universal Driver has obtained Microsoft WHQL certification. If you need to use a driver that is certified WHQL, please download drivers labeled WHQL in the PenMount website.

Read more

For PenMount Windows Universal Drivers before V2.1.0.263, please change the "Double click speed" of mouse, which can be found in the control panel. For PenMount Windows Universal Driver after V2.2.0.283,...

Read more

In Windows 2000 / XP / 2003, PenMount Windows Universal Drivers support the display rotation function of Intel, Nvidia, ATI, SMI, Via, and the Pivot rotation software by Portrait. In Windows Vista / 7 / 8 / 10, rotation...

Read more

The touch wake-up function only works under certain conditions. 1. When using a RS-232 interface, wake up is only supported in S1 mode. 2. When using an USB interface, if the BIOS supports "USB device...

Read more

This problem can occur on PenMount 9000 controllers, which is caused by compatibility issues between BIOS and Windows. Users can change the switch settings to Non-PNP mode, then install the Non-PNP Windows...

Read more

Please update the driver to a PenMount Windows Universal Driver, which is WHQL certified. It can be found on the PenMount website.

Read more

Calibration is needed if the PenMount driver is being installed for the first time. The calibration utility has two modes: standard calibration and advanced calibration. Advanced calibration is used to correct...

Read more

Users can start the calibration utility outside the PenMount Control Panel when using newer PenMount drivers. (1). Supported driver versions PenMount 9000 Driver V5.0 or later. PenMount 5000 Driver V4.1.0005...

Read more

PenMount can support up to 6 touch controllers mapped to different display monitors simultaneously, with the following conditions: ● Please use Windows 2000 / XP / 7. (Windows Vista not supported) ●...

Read more

1. If the driver installed is not a PenMount Windows Universal Driver or an Universal Driver version earlier than 2.1, user must first remove the existing PenMount driver, connect new PenMount control...

Read more

No. Currently users need to map the touch panel manually each time the extended desktop settings are changed.

Read more

1. In Windows 2000 / XP, please press "s" to skip mapping when PenMount Control Panel prompts to map monitors without touch functionality. 2. On Windows 7, If the touch screen is mapped to monitors other...

Read more

The stylus version of the PenMount Windows CE driver utilizes the build-in calibration and right mouse button function of Windows CE. On the other hand, the standard driver uses the functions that PenMount...

Read more

Please add "BSP_NOTOUCH = 0" into the Environment of the Platform Builder. When you finish setting up the WinCE system, there will be built-in Microsoft calibration on the control panel.

Read more

When starting the computer, the Windows CE loader loads the whole system (nk.bin) into memory. Since all registry changes ( including the PenMount calibration parameter ) are stored in memory and will...

Read more

1. In WinCE 4.0 / 4.1 / 4.2, this can be caused by the USB controller settings. USB 1.1 has two kinds of interfaces : OHCI and UHCI, please determine which kind of interface the system is using. If a USB mouse...

Read more

This function is only supported in PenMount WinCE Standard driver V3.0 or later, please refer to Readme.txt in "Driver" folder. (Please modify PMSer.reg file in "Driver" folder for the RS-232 interface,...

Read more

Please adjust the controller switch to non-PNP device. Since all PenMount RS-232 controller devices are Non-PNP in Windows CE, normally the RTS signal of the RS-232 is not used. However, sometimes the operating...

Read more

Please first build the PenMount Driver sub project, then try to build the system image again.

Read more

Yes. The PenMount device driver can support Windows Embedded systems based on the Windows XP kernel including Windows XP Embedded and the Windows Embedded Standard 2009. There are two ways to install the driver: 1....

Read more

The PenMount Windows Universal Driver relies on the Windows HID driver. Please add Windows HID components into the XPE system when building. When you install the PenMount Windows Universal Driver, the system...

Read more

Yes. If you are using Windows XP Tablet PC Edition 2005 / Windows Vista or Windows 7, you will be able to use tablet PC features such as press and hold for right mouse button, hand writing, and flicks...

Read more

Resistive | PCAP Touch Screen | PenMount Touch Screen Controller Manufacturing - AMT

Apex Material Technology Corporation (AMT), Taiwan, since 1998, is a manufacturer of resistive and projected capacitive (PCAP) touch screens, and PenMount touch screen controllers. Main products, including open frame touch screen monitor, optical bonding service, solutions for touch screen display, projected capacitive touch screen and resistive touch screen. Touch screen products and solutions particularly for industrial, medical, outdoor, public commercial and transportation applications.

Certified (ISO, UL, REACH, and RoHS) resistive, projected capacitive (PCAP) touch screens and PenMount touch screen controllers meeting international standards. All touch screen products are supplied with flexible production quantity and long term support.

AMT has been offering customers high-quality resistive and projected capacitive (PCAP) touch screens, and PenMount touch screen controllers, both with advanced technology and 20 years of experience, AMT ensures each customer's demands are met.

Mission & Vision
Mission & Vision

AMT is dedicated to quality. AMT's unique value lies in its ability to fulfill the diverse needs of customers.

Environmental & Energy Policy
Environmental & Energy Policy

AMT is committed to environmental conservation and the perpetuation of green energy.

Quality Certification
Quality Certification

AMT has obtained ISO 9001: 2015, ISO 13485: 2016, ISO 14001: 2015, ISO 45001:2018, UL, REACH, and RoHS certifications.