PenMount provides custom COF design. COF (Chip on Flex) refers to soldering the PCAP touch controller directly to the FPC tail. By integrating the controller IC into the touch panel, less space is required...

Yes, of course. PenMount PCAP controllers can also support a maximum of 10 touch points. Please contact AMT sales representatives for relevant requests.

Yes, PenMount PCAP controllers offer noise immunity, gloved operation, thick glass, and water handling functions in one firmware.

The PenMount PCAP touch controllers can pass IEC 61000-4-3 Radiated Susceptibility (RS) Level III 10V/m and IEC 61000-4-6 Conducted Susceptibility (CS) Level III 10Vrms testing standards.

WP (Water Performance): When there is water on the touch panel surface, no false touch signals are generated in wet areas and single touch operation is available in dry areas. Once the touch panel is dried,...

PenMount PCAP controllers do not require calibration. The only requirement is matching screen rotation angle for all operating systems.

Yes, we recommend LED backlit LCD panels. Before selecting your LCD, we suggest confirming the strength of EMI interference emitted LCD options to assess whether an EMI shielding layer must be added to the touch...

PenMount PCAP controllers can be paired with any PCAP touch panel meeting PenMount controller design standards.

After enabling water handling, SR can increase the range of supported temperatures.

Standard firmware does not support connecting two or more interfaces simultaneously.