How do I use multiple touch panels simultaneously? - FAQs | Manufacturer of Resistive | PCAP Touch Screen | PenMount Touch Screen Controller - AMT

PenMount can support up to 6 touch controllers mapped to different display monitors simultaneously, with the following conditions: A. Please use Windows 2000 / XP / 7. (Windows Vista not supported) B. Update to the latest device driver, PenMount Windows Universal Driver V2.2.0.283. C. USB controllers should be plugged into different ports of the USB Hub. Extensions of the same port are not supported. D. All touch controllers must be PenMount controllers.To launch the monitor mapping program, follow the steps below. 1. In Windows 2000 / XP: In PenMount Control Panel, open the "Multiple Monitors" tab. Check the "Multiple Monitor Support" box. Press the "Map Touch Screens" button. Follow the steps shown on screen and finish the mapping process. When monitor settings has been changed, please run the monitor mapping program again. 2. In Windows 7: Please use clone mode and finish calibration for all PenMount touch controllers. Please set monitor to the mode you desire. Launch "Tablet PC Settings" in the control panel; Click on the "Setup…" button beside "Configure your pen and touch displays. Follow the onscreen instructions to finish monitor mapping. Certified resistive, projected capacitive (PCAP) touch screens and PenMount touch screen controllers meeting international standards, ISO, UL E331240-A1-UL, REACH, and RoHS. All touch screen products are supplied with flexible production quantity and long term support.