How do I start the calibration utility outside the PenMount Control Panel?
Yes, please refer to the following command to directly call the calibration program from the command line: <Path To Install Dir>DmcCtrl.exe -calibration [ 0 | 4 | 9 | 16 | 25 ]
In this case, 0 is for standard calibration, and 4, 9, 16, and 25 is for advanced calibration, but the driver must match:
(1.) Supported PenMount 9000 Driver V5.0 or later.
(2.) PenMount 5000 Driver V4.1.0005 or later.
(3.) PenMount Windows Universal driver full series version
