About Windows
Please see below the set of FAQs about PenMount resistive touch screen controllers used in Windows systems. If you cannot find the answer you want below, please mail to us.
In Windows Server 2008, the PenMount device operates as a touch digitizer by default. However, touch digitizers can only operate when an extra feature called the "Desktop Experience" is installed. The "Desktop...
Read more1. You may use editions prior to and including PenMount Windows Universal Driver V2.2.0.263 for installation. 2. If you use PenMount Windows Universal Driver V2.2.0.283, please modify the install.ini as follows...
Read morePlease download devcon.exe from Microsoft, then please refer to the following instructions: PM9000 RS-232: ● Devcon.exe disable SERENUMDCO9000 (To disable the touch screen) ● Devcon.exe enable...
Read moreThe PenMount Windows Universal Driver V2.1.0.234 or later versions support Non-PnP RS-232 PenMount controllers. V2.1.0.234 will automatically change every COM port settings to allow detection of PenMount...
Read more1. Windows 7 supports multi-touch input devices, and provides API for two finger gestures. Windows Vista only supports single touch input devices. 2. On both Windows Vista and Windows 7, user will be able...
Read moreGesture is a common word for finger or hand motion.Flicks are gestures that are used in Microsoft Vista. According to Windows SDK documents from Microsoft, "A flick is a unidirectional pen gesture that...
Read moreIf you wish to install PenMount Universal Driver V2.0.0.113, please follow the steps below: 1. Download the appropriate PenMount Windows Universal Driver matching your operating system. 2. Uninstall the old PenMount...
Read more1. Uninstall the driver, making sure that the PenMount control board is connected to the computer, then restart Windows.2. Make sure that the driver matches the PenMount control board and operating system...
Read moreYes. The PenMount Windows Universal Driver has obtained Microsoft WHQL certification. If you need to use a driver that is certified WHQL, please download drivers labeled WHQL in the PenMount website.
Read moreFor PenMount Windows Universal Drivers before V2.1.0.263, please change the "Double click speed" of mouse, which can be found in the control panel.For PenMount Windows Universal Driver after V2.2.0.283,...
Read moreIn Windows 2000 / XP / 2003, PenMount Windows Universal Drivers support the display rotation function of Intel, Nvidia, ATI, SMI, Via, and the Pivot rotation software by Portrait. In Windows Vista / 7 / 8 / 10, rotation...
Read moreCalibration is needed if the PenMount driver is being installed for the first time. The calibration utility has two modes: standard calibration and advanced calibration. Advanced calibration is used to correct...
Read moreUsers can start the calibration utility outside the PenMount Control Panel when using newer PenMount drivers.(1). Supported driver versions PenMount 9000 Driver V5.0 or later. PenMount 5000 Driver V4.1.0005...
Read morePenMount can support up to 6 touch controllers mapped to different display monitors simultaneously, with the following conditions: ● Please use Windows 2000 / XP / 7. (Windows Vista not supported) ●...
Read more1. If the driver installed is not a PenMount Windows Universal Driver or an Universal Driver version earlier than 2.1, user must first remove the existing PenMount driver, connect new PenMount control...
Read moreNo. Currently users need to map the touch panel manually each time the extended desktop settings are changed.
Read more1. In Windows 2000 / XP, please press "s" to skip mapping when PenMount Control Panel prompts to map monitors without touch functionality. 2. On Windows 7, If the touch screen is mapped to monitors other...
Read morePlease adjust the controller switch to non-PNP device. Since all PenMount RS-232 controller devices are Non-PNP in Windows CE, normally the RTS signal of the RS-232 is not used. However, sometimes the operating...
Read morePlease first build the PenMount Driver sub project, then try to build the system image again.
Read moreYes. The PenMount device driver can support Windows Embedded systems based on the Windows XP kernel including Windows XP Embedded and the Windows Embedded Standard 2009. There are two ways to install the driver:1....
Read moreThe PenMount Windows Universal Driver relies on the Windows HID driver. Please add Windows HID components into the XPE system when building. When you install the PenMount Windows Universal Driver, the system...
Read moreYes. If you are using Windows XP Tablet PC Edition 2005 / Windows Vista or Windows 7, you will be able to use tablet PC features such as press and hold for right mouse button, hand writing, and flicks...
Read more