How do I use multiple touch panels simultaneously?
PenMount can support up to 6 touch controllers mapped to different display monitors simultaneously, with the following conditions:
● Please use Windows 2000 / XP / 7. (Windows Vista not supported)
● Update to the latest device driver, PenMount Windows Universal Driver V2.2.0.283.
● USB controllers should be plugged into different ports of the USB Hub. Extensions of the same port are not supported.
● All touch controllers must be PenMount controllers.
To launch the monitor mapping program, follow the steps below.
In Windows 2000 / XP:
● In PenMount Control Panel, open the "Multiple Monitors" tab.
● Check the "Multiple Monitor Support" box.
● Press the "Map Touch Screens" button.
● Follow the steps shown on screen and finish the mapping process.
● When monitor settings has been changed, please run the monitor mapping program again.
In Windows 7:
● Please use clone mode and finish calibration for all PenMount touch controllers.
● Please set monitor to the mode you desire.
● Launch "Tablet PC Settings" in the control panel
● Click on the "Setup…" button beside "Configure your pen and touch displays."
● Follow the onscreen instructions to finish monitor mapping.
