Does the PenMount Linux driver support multiple monitors?
PenMount Linux Driver 4.0 and later support multiple monitors. Please follow the steps below to set up monitor mapping.
1. Acquire monitor name:
Please run xrandr and determine the proper monitor name. "VGA1" is the monitor name in the example below:
$ xrandr
Screen 0: minimum 320 x 200, current 800 x 600, maximum 3840 x 1920
VGA1 connected 800 x 600+0+0 0mm x 0mm
800 x 600 60.0* 56.0 0.0
2. To set up the monitor before installing the driver, please edit "penmount.ini," find the section below, and change "Monitor=" to the name found in step 1:
# Mapped Monitor Settings
Monitor=VGA1
3. To set up the monitor after installing driver:
3.1 If your system uses /etc/X11/xorg.conf to config the PenMount device:
Please modify the value of "Monitor" in the PenMount input section:
Section "InputDevice"
Identifier "PenMount"
Option "Monitor" "VGA1"
EndSection
3.2 If your system uses the PenMount config file below:
/usr/share/hal/fdi/policy/20thirdparty/99-x11-penmount.fdi
Please modify the value of "input.x11_options.Monitor," as follows:
<merge key="input.x11_options.Monitor" type="string">VGA1</merge>
3.3 If your system places the PenMount config file in the xorg.conf.d directory, for example:
/etc/X11/xorg.conf.d/99-input-penmount.conf
Please modify the value of "Monitor":
Section "InputClass"
Identifier "PenMount Touch Screen"
Option "Monitor" "VGA1"
EndSection
