RS-232 & USB Combo Control Boards
Three of PenMount’s newest innovations, the PM6500A and PM6202B are the ultimate combo boards. These control boards collectively integrate the features and functions of auto detecting USB and RS232 serial interfaces and support 4, 5 & 8 wire resistive touch screens. They are complemented by superbly developed automatically installing PenMount drivers.
The PM6500A and PM6202B control board utilizes the PenMount 6000 series controller and have been designed for those who desire an all-in-one solution. The boards have a 10-bit A/D converter built-in, making the total printed circuit board denser and their circuit diagrams are also designed for optional 12-bit ADC. There are two connectors on this board, one connector for a 4, 5, 8-wire touch screen cable (optional) and another for a 4-pin USB A type cable (optional).
PM6202B Control Board
PM6202B CZ4 Control Board
PM6202B CW4 Control Board
PM6202B CW5 Control Board
| Touch Screen | For 4- or 5-wire analog resistive touch screens | |
|---|---|---|
| Interface | USB | Full speed 12MHz bps |
| RS232 | 9600 baud ratenon-PnP mode | |
| Touch Screen Controller | PenMount 6000 controller IC | |
| Resolution | 2048×2048 | |
| Dimension holes | (L)70.0mm x (W)20.0mm x (H)10.3mm (max), two 3.0 φ screw | |
| Connector | ZIF connector or Wafer connector on board for touch screen | |
| Diagnostic | LED on board | |
| Cursor accuracy | < 1% (Active Area Diagonal of touch screen with PenMount Advanced calibration utility support) | |
| Resistance range | 30 ~ 1.3K ohm | |
| Operating Voltage | +5V DC | |
| Power Consumption | Standby Mode : 13.8 mA ; Active Mode : 21.8 mA( VCC=+5V, Top sheet Panel Resistance: 365 ohm ; Bottom sheet Panel Resistance: 660 ohm )Note: Actual current will vary according to touch panel resistance. | |
| Electro Static Discharge(ESD) | Air Discharge 15KV , Contact Discharge 8KV | |
| Storage Temperature | -40 ℃ ~ 85 ℃ | |
| Operating Temperature | -20 ℃ ~ 70 ℃ | |
PM6202B Driver Software
- RS232 interface：DOS, Windows 2000/ XP/ XPE/ 2003/ 2008/ Vista/ 7 / 8/ 10, Windows CE 5.0/ 6.0(for X86, Armv4, Armv4i platform), Windows Embedded Compact 7/ 2013(for X86, Armv7, MIPSII platform), Linux (Kernel 3.x and X-Window mode), QNX 6.2/ 6.3.2/ 6.4.1/ 6.5
- USB interface：Windows 2000/ XP/ XPE/ 2003/ 2008/ Vista/ 7 / 8/ 10, Windows CE 5.0/ 6.0(for X86, Armv4, Armv4i platform), Windows Embedded Compact 7/ 2013(for X86, Armv7, MIPSII platform), Linux OS (Kernel 3.x and X-Window mode), QNX 6.4.1/ 6.5 (Inbox support)
PM6500A Control Board
| Touch Screen | For 4, 8-wire or 5-wire analog resistive type | ||
|---|---|---|---|
| Interface | USB | Full speed 12Mbps | |
| RS232 | 19200 baud rate, N81PnP mode | ||
| Touch Screen Controller | PenMount 6000 controller IC | ||
| Resolution | 2048×2048 | ||
| Size | 60×26 mm, two 3φ screw holes | ||
| Cursor accuracy | < 1% (Active Area Diagonal of touch screen with PenMount Advanced calibration utility support) | ||
| Resistance Range | 50~1.3K ohm | ||
| Diagnostic | LED | ||
| Operating Voltage | +5V DC | ||
| Electro Static Discharge (ESD) | Air Discharge 15KV , Contact Discharge 8KV | ||
| Storage Temperature | -40 ℃~ 85 ℃ | ||
| Operating Temperature | -20℃ ~ 70 ℃ | ||
| Power Consumption | Standby Mode : 14.4 mA ; Active Mode : 22.5 mA(VCC=+5V, Top sheet Panel Resistance: 365 ohm; Bottom sheet Panel Resistance: 660 ohm) Note: Actual current will vary according to touch panel resistance. | ||
PM6500A Driver Software
- RS232 interface：DOS, Windows 2000/ XP/ XPE/ 2003/ 2008/ Vista/ 7 / 8/ 10, Windows CE 5.0/ 6.0(for X86, Armv4, Armv4i platform), Windows Embedded Compact 7/ 2013(for X86, Armv7, MIPSII platform), Linux (Kernel 3.x and X-Window mode), QNX 6.2/ 6.3.2/ 6.4.1/ 6.5
- USB interface：Windows 2000/ XP/ XPE/ 2003/ 2008/ Vista/ 7 / 8/ 10, Windows CE 5.0/ 6.0(for X86, Armv4, Armv4i platform), Windows Embedded Compact 7/ 2013(for X86, Armv7, MIPSII platform), Linux OS (Kernel 3.x and X-Window mode), QNX 6.4.1/ 6.5 (Inbox support)